How tight should your chainsaw chain be

The chainsaw chains require a certain tension to operate properly. During operation, the chainsaws need to have that certain tension, but it is quite possible that over time, the chainsaw chains become lose and they start sagging. If the saw chainsaw is loose, then during operation there is a possibility that it will come off and will end up causing serious accidents. The user before use, must consider the tightness of the chainsaw. If it is loose, it will not work properly and will end up being a safety hazard for the user.

Just to be on the safe side, every time you intend to do some work with a chainsaw, make sure to check its tension and the tightness. This will make your work easier and smoother; it will also make sure that you are prevented from accidents.

We hope you love the products we recommend! Just so you know, may collect a share of sales or other compensation from the links on this page. Oh, and FYI — prices are accurate and items in stock as of time of publication.

There are certain things which help you understand good tension of the chainsaw chain.

The good tension of the chainsaw chain:

The good tension of the chainsaw chain is when it is just a little loose on the bar yet tight enough the drive links are unable to be pulled from the bar nose. So, a little loose so the chain can move easily, and tight enough that it doesn’t get pulled off during operation. In conclusion, the chainsaw chain should not be very tight and similarly, it should not be very loose. Loose enough to allow easy movement of the chain and tight enough to have a good hold on the bar.

So, now you know how tight your chainsaw chain should be, but let’s look at the bad tension as well. So, you know, what things you need to avoid while dealing with a chainsaw chain.

The bad tension of the chainsaw chain:

Now if you pull the chainsaw chain, and you notice that the drive links disengage from the bar then this makes it certain that you need to tighten the change. The disengagement of the drive links is the determining factor of the bad tension. You certainly need to avoid this to keep yourself and people who intend to use the chainsaw safe.

On the contrary, the chainsaw can be overtightened as well. When you pull the chain away from the from, the links must not disengage but you should feel a slight play in the chain. If there is no play in the chain then it is overtightened which means that it will not work well. During operation, an overtightened chain can cause the chainsaw to break. You surely don’t want to break your chainsaw and invest into it again so make sure that the chain is not too tight and not too loose.

Now if you see that the chain is loose, what are you going to do? Well, it takes less than a minute to tighten the chain and its pretty easy. There is no harm in checking the tension every time you intend to use the chainsaw.

In order to tighten or loosen the chain, you will need to first loosen the nuts that are present on the sides of guide bar. This will give the guide bar and chain, the room that is required. Next, you have to adjust the tension screw. When you tighten the screw, the chain will be tightened and when you loosen the screw, the chain will be loosened. So, this is how you determine how tight your chainsaw should be. Its easy and less time consuming, by following this method you will be able safely get your work done and even with good efficiency.

Lastly, maintaining the chainsaws is very important, if you keep a check on their condition and working then if there is an issue or a problem, you can easily figure it out and the chainsaw will become even more durable. If you don’t maintain your chainsaw, you can possibly be facing an accident or you will end up breaking your chainsaw. Make the best of your equipment investment by making it last longer.

Chainsaws are dependent upon the working of the chain, we hope that this article was able to help you determine the right tension of the chain.