How to Cut a Large Log With a Small Chainsaw

As an Amazon Associate I earn from qualifying purchases.

Cutting a large log with a small chainsaw can be very dangerous, especially if you are not well trained. The following advice is intended to save you from serious injury.

The first thing you need to do when cutting big logs with a chainsaw is to understand the power of the saw and the limitations of it. You need to learn the basic tools you need to use on your chainsaw, and then you need to start chopping away at a log. You should only use the chainsaw in a safe manner and not make too much noise while you are doing this.

One important thing you need to keep in mind is that the amount of power that a chainsaw has been directly related to the chainsaw’s weight. You need to make sure that you do not exceed the weight of the chainsaw. It will only cause it to break down more quickly. So a heavy chainsaw may be good for cutting soft wood, but it will not help you if you are attempting to cut logs that are thick.

The next thing you need to do is learn how to drive the chainsaw forward. To do this, you will need to learn how to control the blade using your body. This is probably the most dangerous part of operating a chainsaw.

Your left hand should be placed near the tip of the saw, about halfway between the saw’s handle and the back. Make sure you do not touch the blade with your right hand. Also, make sure that you do not push on the saw handle with your left hand.

When you begin cutting, you should try to move the saw forward as fast as possible, moving the blade back as little as possible. If you’re not holding the handle properly, you could accidentally end up pushing on the back of the handle with your right hand.

If you start off with the chainsaw moving forward rather than back, you will be able to control the backswing better. This means that you won’t cause as much damage to the chainsaw.

Another way to cut a big log with a chainsaw is to lie down. Holding the saw by your thighs rather than your back is very important here. Most experienced chainsaw users find that laying down is much safer.

Another way to cut a big log with a chainsaw is to take a wheelbarrow and run it across the logs. You can do this even with a chainsaw that does not have a back swing. Make sure that you hold the back of the chainsaw handle at a distance that is above your waist, not below it.

The third way to cut a large log with a chainsaw is to take a large log and hit it into a tree. This is a safer way to cut large logs. However, it is not a lot easier.

In order to practice this skill, you will need to tie the log onto a stick, and then start bashing the stick into the wood with the stick. Then, you will need to run a length of rope around the log so that you can stand on the log. Make sure that you don’t get all the weight of the log on your body when you are doing this.

These are just some of the ways that people are able to learn how to cut a large log with a small chainsaw. Make sure that you do a little research before you start making your own chain saws, or using one that you might purchase.