How to keep chainsaw from getting stuck

While you are out cutting wood, it is quite possible that you will end with a stuck chainsaw if you are no careful enough. There are different methods that people use in order to prevent of the chainsaw from getting stuck. People usually use the cross-cutting method of cutting the wood, with this method, you will be able to get the job done without the chainsaw getting stuck.

Before you start cross-cutting the log, make sure that you are not anywhere close to a slope, you also need to take the necessary measures. Make sure that you have safety glasses on, also, you must have protective shoes and gloves on to keep you safe.

We hope you love the products we recommend! Just so you know, electrichainsaw.com may collect a share of sales or other compensation from the links on this page. Oh, and FYI — prices are accurate and items in stock as of time of publication.

One thing you also need to take care of is that you need to make sure that the area around you where you are cutting the log is clear. You shouldn’t have large objects in your way because you can get yourself injured. Also, find a place which is uphill and stay far away from the slopes.

Cross-cutting method:

With the cross-cutting method, you cut the 1/3 diameter of the wood in one direction, and then you cut the rest of it from the other direction. This way, the chainsaw doesn’t have to through the diameter all the way and so it doesn’t get stuck. There are two things that you need to take care of, first you need to have support on the log that you are cutting. If you have support on both the sides then you can cut from the top as the pressure is on top.

Secondly, if you are providing support to only one side of the log then you will start cutting from the bottom because the pressure will be at the bottom. During the cross-cutting method, wedges or crowbars can be used to make sure that the cuts are made smoothly without getting the chainsaw trapped. Unlike other methods of felling a tree, the cross-cutting method gives you a clear direction of where and how you are going to cut which makes the whole process easier and fuss-free. If you intend to cut a log which is laying on the ground then cut it half way through, roll it over and then cut more. This way, you will be able to make the cut easily without getting the chainsaw stuck.

If you do somehow get the chainsaw trapped or stuck, then moving around the running chainsaw can be really bad for chainsaw because you can end up breaking it. With this, you can even injure yourself and cause a fatal injury. Instead of moving the chainsaw around, the best possible method is to use a wedge, place it between the cut to release some pressure. Add another wedge if you feel that more pressure needs to be released. Once, you feel that the pressure is released you can get rid of the trapped chainsaw from the log. The wedges come in different sizes, and some of them are spiked too. You can keep a few wedges around you while you are doing the task and then you can use them when needed.

If you intend to make a downward cut, the pressure will be downward so the chances of the chainsaw getting pinch are higher. In this case, what you can do is, you can place the firewood underneath the log, the places where you find small gaps, place the firewood and you have something for support. With these pieces, the tension is released. In this way when you will be making cut, you will not get the chainsaw trapped.

When you make the first 1/3 cut of the diameter, you can place a wedge in between to prevent it from closing up, this will make it super easy for you to work your way throughout the whole log. You can follow this practice for logs which have a larger diameter. For the logs, which have a smaller diameter you can just follow the cross-cutting method and you will easily cut through them.

We hope that with the help of this article, you will be able to get the job done easily.